100% Valid Lead2pass Microsoft 98-366 New Questions Free Version:
A router’s static route is set by the:
A. Adjacent network
B. Next upstream router
C. Network administrator
D. Routing protocol
Static routing is a form of routing that occurs when a router uses a manually-configured routing entry, rather than information from a dynamic routing protocol to forward traffic.
Which setting is used to determine the Domain Name System (DNS) settings on a client computer?
nslookup is a network administration command-line tool available for many computer operating systems for querying the Domain Name System (DNS) to obtain domain name or IP address mapping or for any other specific DNS record.
The host name of the fully qualified domain name (FQDN) mail.exchange.corp.nwtraders.com is:
Hostnames are composed of series of labels concatenated with dots, as are all domain names. For example, let’s break mail.google.com into its component parts: mail is the host or local hostname; and google.com is the domain or parent domain name.
To which IP configuration does the CIDR notation 192.168.1.1/25 refer?
A. 192.168.1.1 255.255.255.64
B. 192.168.1.1 255.255.255.1
C. 192.168.1.1 255.255.255.32
D. 192.168.1.1 255.255.255.256
E. 192.168.1.1 255.255.255.128
Which command is used to verify that a server is connected to the network?
Ping is a computer network administration software utility used to test the reachability of a host on an Internet Protocol (IP) network and to measure the round-trip time for messages sent from the originating host to a destination computer.
Which of these represents the Internet Protocol version 6 (IPv6) loopback address?
The localhost (loopback) address, 0:0:0:0:0:0:0:1, and the IPv6 unspecified address, 0:0:0:0:0:0:0:0, are reduced to ::1 and ::, respectively.
Which of these addresses is a multicast address?
The full range of multicast addresses is from 188.8.131.52 to 184.108.40.206.
Which of the following uses pointer records and A records?
B. DNS Server
C. NAT Server
DNS records include:
The ipconfig command will:
A. Configure routers
B. Display a client’s address
C. Display a client’s broadcast mode
D. Configure DHCP clients
Displays all current TCP/IP network configuration values and refreshes Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) settings. Used without parameters, ipconfig displays the IP address, subnet mask, and default gateway for all adapters.
One reason to incorporate VLANs in a network is to:
A. Increase the number of available IP addresses.
B. Increase the number of available Media Access Control (MAC) addresses.
C. Reduce the number of broadcast domains.
D. Reduce the number of nodes in a broadcast domain.
VLANs provide the following advantages:
* VLANs enable logical grouping of end-stations that are physically dispersed on a network. …
* VLANs reduce the need to have routers deployed on a network to contain broadcast traffic. …
* Confinement of broadcast domains on a network significantly reduces traffic.
By confining the broadcast domains, end-stations on a VLAN are prevented from listening to or receiving broadcasts not intended for them. Moreover, if a router is not connected between the VLANs, the end- stations of a VLAN cannot communicate with the end-stations of the other VLANs.
98-366 dumps full version (PDF&VCE): https://www.lead2pass.com/98-366.html
Large amount of free 98-366 exam questions on Google Drive: https://drive.google.com/open?id=1J1TYDXYAevVGpYNVoFO-ArQmFT3HppSo